OAJ Series FAST Flow High Shear DispersER
Liquid flow direction: the whole is vertically mixed, from top to bottom, the shear is soft, and the amount of intake air is small;
The vertical mixing effect is good: it is not easy to produce precipitation, there is basically no dead angle, and the soft shearing force;
Suitable for most suspension working conditions;
Suitable for efficient liquid-liquid dispersion and solid-liquid dispersion;
Modular design: various stators without holes, round holes and rectangular slots can be selected
|
Model |
Power(kW) |
Speed(rpm) |
A |
B |
Standard/Max |
Volume(L) |
|
OA90 |
1.5 |
300~6000 |
705 |
/ |
442 |
10-50 |
|
OA 100 |
2.2 |
300~6000 |
980 |
320 |
650 |
50-100 |
|
OA 120 |
4 |
2900 |
1220 |
340 |
838 |
100-300 |
|
OA 140 |
7.5 |
2900 |
1575 |
370 |
1130 |
200-800 |
|
OA 160 |
11 |
2900 |
1680 |
420 |
1130 |
300-1000 |
|
OA 180 |
18.5 |
2900 |
1785 |
450 |
1200 |
500-1500 |
|
OA 200 |
22 |
2900/1470 |
1855 |
450 |
1200 |
800-2000 |
|
OA 240 |
37 |
2900/1470 |
2145 |
600 |
1395 |
1500-5000 |
|
OA 270 |
55 |
1470 |
2375 |
640 |
1500 |
2000-8000 |
Note
The upper limit processing capacity in the table refers to the data measured when the medium is “water”;
If the viscosity or solid content of the medium is high, it is recommended to use it with pipeline high-shear dispersion emulsifier;
If there are special working conditions such as high temperature, high pressure, flammable and explosive, corrosion, etc., detailed and accurate parameters must be provided;
The data in this table is subject to change without notice, the correct parameters are subject to the actual product provided.
Bearing box: stainless steel bearing box
Mechanical seal: maintenance-free mechanical seal
Material: SUS316L stainless steel
Sanitary level: chemical grade, food grade, pharmaceutical grade
Optional working head
Standard A type working head
Strong shear force, shear probability and high shear efficiency;
Suitable for dispersion of low-medium viscosity and solid-liquid suspension;
When the viscosity increases, it is easy to produce dead angle;
Standard M type working head
Large circulation volume, high circulation efficiency, strong turning effect;
Applicable to a variety of working conditions, a wide range of viscosity and solid content;
Very efficient for working conditions with floating and sedimentation;
OJ Jet Flow Working Head
Liquid flow direction: the whole is vertically mixed, from top to bottom, the shear is soft, and the amount of intake air is small;
The vertical mixing effect is good, it is not easy to produce precipitation, there is basically no dead angle, and the soft shearing force;
Suitable for most suspension working conditions;
Suitable for efficient liquid-liquid dispersion and solid-liquid dispersion;
Modular design: various stators without holes, round holes and rectangular slots can be selected;
① OJ-X Jet Flow Square Hole Working Head
② OJ-Q Jet-flow round hole working head
③ OJ-Q round hole physical picture
